Coffee roasting pails 30 litre with vent hole and lid embossing

The coffee roasting bucket 30 litre with carrying handle, vent hole and zero waste embossing was specially developed for coffee roasting and serves as sustainable metal packaging for venting, storing and selling coffee.

Product number: 13300204

ab 12,47 € *
Packing Unit Amount / Packing Unit Price per piece Price / Packing Unit
box 4 14,97 € * 59,86 € *
pallet 56 12,47 € * 698,21 € *
* incl. tax 20%, plus shipping

The coffee roasting bucket was specially developed for coffee roasting and can be used as sustainable metal packaging for venting and storing coffee during and after the roasting process, as well as for selling coffee. The lid of the roasting bucket with zero waste embossing is equipped with a vent hole / overpressure hole to avoid overpressure when outgassing coffee. The included valves, together with the valve fluid, provide aroma protection and protection against entry of dirt and foreign particles.

The coffee roasting pail is delivered including aroma protection vent valve, lid with zero waste embossing and vent hole, light latch ring and metal transport safety splint (reusable). The valve fluid which is required for the valves can be ordered optionally and is sufficient for at least 100 valves.

  • The roasting pails are made in Austria.
  • The roasting buckets are made of tinplate, inside BPA-NI protective lacquered and outside protective lacquered.
  • The buckets are equipped with a metal carrying handle.
  • The metal roasting pails are food safe.
  • The metal buckets can be used several times if handled properly.
  • Stackable (conical shape) for space-saving storage.
  • Optimal emptying is achieved by the large opening and the ringless, thin bucket edge.
  • Metal buckets without approval for dangerous goods.
  • The roasting pail is made of tinplate (tinned sheet steel). Pails made of tinplate are not suitable for water-containing filling goods or moist storage/handling. Contact with water or moisture lead to rust.
Instructions for use: Shake the valve fluid well before use. Put the valves tape down with the valve side. Apply 1 small drop left and right outside onto the punched-out contours. After 5 minutes resting period, remove the excessive fluid of the valve. Press the valve briefly and firmly with the punched-out contours above the vent hole on the pail lid. Using the latch ring, the roasting pail is firmly attached to its lid (clockwise closing). The latch ring can additionally be fixed with a metal transport safety splint.



The roasting pail will only be delivered with the specified accessories (icon images). Due to the different fillings on the market and their individual composition, we cannot confirm absolute suitability for respective fillings. It is the responsibility of the user/bottler of the packaging to determine and confirm the suitability for the respective filling in advance. The actual suitability of the chosen packaging can only be properly ascertained by performing your own preliminary tests. The specified range of use for this article represents a rough classification based on the legal requirements.

Attributes

Material: Metal
Application: Food
Capacity category: 20 - 30 litre
Product type: Coffee roasting bucket
Volume: 30 litre
Exterior varnish: Protective coating
Interior varnish: Protective coating
Diameter: D1=310mm/D2=328mm
Height: 390 mm
Food safe: Yes
Dangerous goods approval: No
Stackable: Yes
Recycling codes: FE40

Accessory

Shop with confidence

Fast delivery

* incl. tax, plus shipping

copyright 2021 by Dosenprofi